Products
Why Choose SecureMe?
Since 1990, we’ve produced Italy’s #1 tilting garage door, protecting you, your family, and your valuables
There are at least two reasons why SecureMe, the leading security tilt door in Italy, can be considered unique.
1. Structural Robustness
The first noticeable feature is the robustness of the structure.
At the same time, when using a SecureMe tilt door, despite its substantial structure, one is surprised by how easily it opens.
You’ve probably experienced arriving at your garage, laden with suitcases or heavy bags. It’s at that moment you’ll appreciate the fact that the tilt door lifts with just a finger.
You’ll appreciate its ease of use without compromising on the protection of a sturdy door.
2. Never Warps
SecureMe, Italy’s number one tilt door, never warps.
Thanks to a torsion-resistant mechanism perfected over the years and patented by the company, we guarantee our customers the ability to lift their door from any point with minimal effort, without it losing its balance.
It will feel like someone is helping you lift it, but the only assistance comes from the door itself.
How is SecureMe, Italy’s number one security tilt door, made?
COMPONENTS:
Frame
- Constructed with galvanized drawn steel
- Wall thickness: 20/10
- Corner welding treated with cold zinc
- Stops on three sides in shaped galvanized profile with rubber seal for air tightness
Uprights
- Made with galvanized profile “C”
- Thickness 30/10 with square section 55×55
- Galvanized sheet for counterweight sliding, with thickness 15/10 and section 300mm, injection-pointed on profile “C”
- Counterweight cover casing thickness 10/10 and screwed to the vertical upright
- Variable section depending on the type of door, allowing installation of the tilt door anywhere without the need for masonry work
Pulley
- Diameter of 160mm
- Groove turned exactly to the diameter of the cable
- Turning system that prevents cable pinching and wear over time
Cable
- Diameter of 8mm
- Loop crimped at the ends
Upper Crosspiece
- Made with galvanized profile “C”, thickness 30/10 with square section 55×55
- Covering sheet with thickness 15/10
- Upper covering casing thickness 10/10 and screwed to the crosspiece
Counterweights
- Made of oxy-cut steel with modular attachment system
- Possibility to add weight in case of subsequent automation or post-installation modifications requiring increased weight.
Coating
- Coating made with galvanized elements 11 cm wide and 10/10 thick, for maximum security
- Interlocking between one element and another consisting of a tongue-and-groove system reaching 1 cm of ribbing
- Frame fixing carried out by hot injection, while internal omegas lock the elements in the central part of the door
- Possibility to choose multilayer coatings worked with a pantograph, for a personalized aesthetic
- Processing thicknesses: 25 or 30 mm, depending on the model
- Painting with resin suitable for outdoor use
Mechanism
The tilting movement of the coating is managed by a torsion bar that ensures the door always remains flat during opening and closing.
Thanks to this system, it is possible to lift doors up to 6.3 meters without ever going into torsion.
Motorization
The motor is installed on the opening coating of the door and acts directly on the side arms, without the need to install curved or telescopic arms.
The direct transmission system minimizes the risk of damage, immediately stopping the motor if the door encounters an obstacle during opening.
Certification
All our structures are certified in class 3 up to a size of 6300x4500mm
